PIXEL Subscribe FR EN

Update AxeOS step by step

To update AxeOS, open your Bitaxe’s address in a browser, go to the Update section, upload the esp-miner.bin file of the latest release, then refresh the page once it has restarted. Since version 2.15.0 that single file is enough: the interface is built into it, no more www.bin. Latest version checked: 2.15.4, released on 21 October 2026.

Published 24 September 2026, updated 2 November 2026 · by Pixel · 5 min read

Video The topic on video Play the video: The Bitaxe update that changes the interface (AxeOS 2.11) 5:06
The Bitaxe update that changes the interface (AxeOS 2.11) Video in French, with subtitles · open on YouTube The video loads from YouTube when you press play.
Contents 6 parts and a FAQ · 5 min read
  1. Before you start
  2. The steps (version 2.15.0 and later)
  3. Before version 2.15.0: two files
  4. Golden rules
  5. If the update fails
  6. Bitaxe Web Flasher: reinstall over USB, step by step

1. Before you start

  • Write down your settings: pool A server that machines connect to. A regular pool shares the earnings, a solo pool does not. Solo or pool?, port, user, Wi-Fi. They are normally kept, but you never know.
  • Read the release notes: they say what changes, and whether anything special is needed.
  • Use the files for your machine. Bitaxes run AxeOS The open-source Bitaxe software, set from a browser: pool, frequency, voltage, fan. Update it (the ESP-Miner project); NerdQAxes have their own version of the software, on their project page.

2. The steps (version 2.15.0 and later)

  1. Open AxeOS by typing the machine’s IP address in the browser. Since version 2.15.0, its network hostname works too.
  2. Go to the update section (Update, in settings or the system menu depending on the version). Recent versions show the latest available version directly.
  3. Get the file esp-miner.bin if the interface does not do it for you, from the project’s releases page.
  4. Upload it from the update page and wait for the upload to finish.
  5. Let the machine restart, then refresh the page: the 2.15.0 release notes ask for it, since the interface now ships with the firmware. Then check the version number, your pool settings and that the hashrate Computing power: the number of attempts per second of a machine or of the whole network. The higher it is, the more tickets you play in each draw. comes back.

3. Before version 2.15.0: two files

Up to version 2.14, the interface was a separate file: you uploaded the firmware (esp-miner.bin) and the interface (www.bin), in the order given in the release notes, waiting for each upload to finish. Recent releases no longer publish a www.bin: if your machine still runs 2.14 or older, read the notes of the target version before you start.


4. Golden rules

  • Never cut the power during the upload or the restart.
  • Move the machine closer to the router if your Wi-Fi is weak: a drop mid-upload makes the update fail.
  • No need to jump on every release: if everything runs well, waiting a few days for community feedback is a good habit.

5. If the update fails

No panic: in most cases, simply upload again. If the machine no longer starts at all, the software can be reinstalled over USB from a computer, with the Bitaxe project’s online flashing tool, the Bitaxe Web Flasher: it installs a complete image made for your board. For anything stuck, Discord is there.

What version 2.10 changed: my Bitaxe 2.10.0 video (in French). For the first setup: Set up a Bitaxe, step by step. If the machine runs but no longer mines after the update, check the Wi-Fi first: Bitaxe will not connect to Wi-Fi.


6. Bitaxe Web Flasher: reinstall over USB, step by step

The Bitaxe Web Flasher is the project’s official tool to write a complete AxeOS factory image over a USB cable, straight from a web page. It is the fix when the OTA update (over Wi-Fi, from the browser) is no longer possible: a machine that no longer boots, or an interface you cannot reach. For a routine update, stick to the OTA method above.

  1. Use a Chromium-based browser on a computer: Chrome, Edge or Brave. The tool relies on the browser’s serial port access (Web Serial), and its code turns other browsers away.
  2. Plug the Bitaxe into the computer through its USB-C port, with a cable that carries data. On a Gamma 601 or 602, a USB-A to USB-C cable is the safer choice: only the 603 board fixes USB-C to USB-C detection.
  3. Click Connect and pick the Bitaxe’s port in the browser window.
  4. Choose the model, the board version and the firmware version. AxeOS shows the board number in the System menu (Board Version). The tool only offers the latest stable releases.
  5. Decide about your settings: by default the whole factory image is written, so Wi-Fi, pool and address go back to the factory values, with an address that is not yours. The Keep configuration box leaves the settings area untouched. Write your settings down either way.
  6. Click Start Flashing, wait for the end without unplugging anything, then let the machine restart. If your settings were wiped, set it up again: Bitaxe setup guide.

Two cautions, checked on 2 November 2026. The Web Flasher’s list and the 2.15.4 factory images cover Gamma boards 601 and 602, but not the 603: never write another board’s image at random, ask on Discord first. And NerdQAxes have their own tool, the NerdQAxe Web Flasher, which the official page points to. Finally, the Start Logging button records what the machine prints on its serial port: handy to attach to a request for help.


Frequently asked questions

Do I still need to upload www.bin?

No, not since ESP-Miner version 2.15.0: the AxeOS interface is built into esp-miner.bin, which is enough on its own. Recent releases no longer publish a www.bin.

What is the latest AxeOS version?

The latest stable version I checked is 2.15.4, released on 21 October 2026. The ESP-Miner releases page on GitHub always shows the newest one.

Are my settings kept after the update?

Normally yes: pool, Wi-Fi and settings stay in place. Write them down before you start anyway, just in case.

What if my Bitaxe no longer restarts?

Try the upload again first. If the machine does not start at all, reinstall the software over USB with the Bitaxe Web Flasher, the project’s official tool.

Does the Bitaxe Web Flasher erase my settings?

By default, yes: it writes the full factory image, so Wi-Fi, pool and address go back to factory values, with an address that is not yours. Tick Keep configuration to keep the settings area, and write your settings down before you start.

Bitaxe Web Flasher not working: what should I check?

Start with the browser: it needs Chrome, Edge or Brave on a computer, because the tool uses Web Serial. Also check the USB cable, which must carry data, and on a Gamma 601 or 602 prefer a USB-A to USB-C cable.


Sources

A question about this guide? Ask it on the Discord, several of us answer there.

Share X WhatsApp Telegram


Other guides

See all 41 guides

@pixel_pow All of this is on video too. Join the channel's 3.4K subscribers.
Subscribe

Back to the ticket

Back of the ticket: legal notice, privacy, terms